Notes:
The RG2304SP local extender requires an IEEE 802.3at - PoE+ (25.5W)
capable network switch to provide power to the unit.
The POWER status LED illuminates BLUE when sufficient power is
present and RED when the power level is insufficient.
An optional 24V 1A AC power adapter can be connected to the local
extender and is sold separately (order part number 21-00110). If power
is present at both the RJ45 Link and DC power ports, the DC power
adapter serves as the primary source with PoE as the backup.
Icron
| An Analog Devices Brand
4664 Lougheed Hwy., Suite 221
Burnaby, BC V5C 5T5
Canada
t +1 604.638.3920
Visit
Copyright
©
2023 Analog Devices, Inc. All Rights Reserved.
Trademarks and registered trademarks are the property of
their respective holders. ADI/Icron assumes no responsibility
for errors that may appear in this document. Information
contained herein is subject to change without notice.
90-01906-A01
Max 100m
(CAT cable not included)
LAN
USB Devices
Host Computer
LAN
Local Extender
Local Extender
Local Extender
Remote Extender
Remote Extender
Max 100m
1
2
Connect your USB device(s) to the remote extender. The local extender
also acts as a 3-port hub to accommodate additional USB devices.
3
4
Place the remote extender (sold separately) where desired. Connect a
CAT 5e/6/7 patch cable to the RJ45 Link port on the remote extender
to an IEEE 802.3at - PoE+ (25.5W) capable LAN port.
Connect the local extender to the USB port on your host computer using
the included USB cable.
Connect a CAT 5e/6/7 patch cable from the RJ45 Link port on the local
extender to an IEEE 802.3at - PoE+ (25.5W) capable LAN port.
Before starting, install any required drivers for your USB device(s).
