Installation Guide
LEX
Host Computer
REX
All USB Devices
Up to 100m between extenders over CAT 5e/6/7
Power can be supplied to either LEX or REX
Mounting the LEX or REX
If mounting is required, the LEX and REX extenders have two mounting slots on each side for use with cable
tie/zap straps (not included).
Preparing for Installation
Before you can install the Ranger 2311, you need to prepare your site:
1. Determine where the computer is to be located and set up the computer.
2. Determine where you want to locate the USB device(s).
3. If you are using surface cabling, the Ranger 2311 supports a maximum distance of 100m.
OR
If you are using premise cabling, ensure CAT 5e/6/7 cable is installed between the two locations, with
CAT 5e/6/7 information outlets located near both the computer and the USB device(s), and the total
length, including patch cords is no more than 100m.
6
Connect the provided power adapter to either the LEX or REX.
mounting slot
