Icron Ranger 2101 Скачать руководство пользователя страница 10

PROBLEM

CAUSE

SOLUTION

Link LED is on,
Host LED is off

•  The Host computer is not 

   powered on.

•  The computer does not 

   support USB hubs.

•  The Ranger is malfunctioning

1.  Disconnect all USB devices from the REX unit.

2.  Disconnect the LEX unit from the computer.

3.  Disconnect the REX unit from the AC power 

adapter.

4.  Reconnect the LEX unit to the computer.

5.  Reconnect the REX unit to the AC power 

adapter.

6.  In the Universal Serial Bus controllers section of 
     Device Manager, check that the Ranger is 

     recognised as a “Generic USB Hub”.

Ranger units were 
working but the 
Host LED on REX 
unit  is  suddenly                          
blinking

The REX unit is in suspend mode. 
The operating system may put 
the Ranger in suspend mode 
when the computer is put into a 
Suspend/Standby state or when 
no USB devices are attached. 

1.  Recover/Resume the operating system from 

     Suspend/Standby mode (see your operating 
     System’s documentation).

2.  Attach a USB device to the Ranger.

All LEDs on both 
the LEX unit and 
REX unit are on 
but the USB device 
does not operate 
correctly or is 
detected as an 

“Unknown Device” 

in the operating 
system.

•  The USB device is 

   malfunctioning.

•  The computer does not 

   recognise the USB device.

•  The application software for 

the device is not 

   operating.

•  The Ranger is malfunctioning.

1.  Disconnect the Ranger from the computer.

2.  Connect the USB device directly to the USB port 
     on the computer.

3.   If the device does not operate properly, 
      consult the user documentation for the device.

4.  Update your system BIOS, chipset or USB Host 
     controller drivers from your System/Mother
     board manufacturer’s website.

5.  If the device operates properly when directly 
     connected to the computer, connect another 

     device (of a different type) to the Ranger. 

     Connect the Ranger to the computer.

6.   If the second device does not operate, the 
     Ranger may be malfunctioning.  
     Contact technical support for assistance.

7.  If the second device does operate properly, the 
     first device may not be compatible with the    
     Ranger. 

9

Содержание Ranger 2101

















Отзывы: