Icron DVI Ranger 500, Руководство пользователя

Страница: 11 / 20

User Guide
7
Connecting the TX unit to the RX unit
NOTE
:
To ensure proper operation, we recommend that only Category 5 or
better, Unshielded Twisted Pair (UTP) cabling be used to connect
the TX unit to the RX unit. The UTP cabling must have a straight-
through conductor configuration with no crossovers, and must be
terminated with 8-conductor RJ45 connectors at both ends.
With Surface Cabling
1. Remove the dust covers from the Link ports of the TX unit and the
RX unit.
2. Plug one end of the first duplex multimode cable (not included) into
the Link 1 port on the TX unit. Plug the other end of this cable into
the Link 1 port on the RX unit.
3. Plug one end of the second duplex multimode cable (not included)
into the Link 2 port on the TX unit. Plug the other end of this cable
into the Link 2 port on the RX unit.
4. Plug one end of the Category 5 UTP cabling (not included) into the
DDC port on the TX unit. Plug the other end of the Category 5 UTP
cabling into the DDC port on the RX unit.
With Premise Cabling
1. Remove the dust covers from the Link ports of the TX unit and the
RX unit.
2. Plug one end of the first duplex multimode patch cord (not included)
into the Link 1 port on the TX unit. Plug the other end of this cable
into the first LC receptacle on the adjacent information outlet.
3. Plug one end of the second duplex multimode patch cord (not
included) into the Link 2 port on the TX unit. Plug the other end of
this cable into the second LC receptacle on the adjacent information
outlet.
4. Plug one end of a Category 5 patch cord (not included) into the DDC
port on the TX unit. Plug the other end of the patch cord into the
RJ45 receptacle on the adjacent information outlet.
5. Plug one end of the third duplex multimode patch cord (not
included) into the Link 1 port on the RX unit. Plug the other end of
this cable into the first LC receptacle on the adjacent information
outlet.