background image

DVI Ranger 500 

12 

Limited Hardware Warranty 

Icron Technologies Corporation warrants that any hardware products 
accompanying this documentation shall be free from significant defects in 
material and workmanship for a period of one year from the date of 
purchase. Icron Technologies Corporation’s hardware warranty extends to 
Licensee, its customers and end users. 

Hardware Remedies 

Icron Technologies Corporation’s entire liability and the Licensee’s 
exclusive remedy for any breach of warranty, shall be, at Icron Technologies 
Corporation’s option, either (a) return of the price paid or (b) repair or 
replacement of hardware, which will be warranted for the remainder of the 
original warranty period or 30 days, whichever is longer. These remedies are 
void if failure of the hardware has resulted from accident, abuse, or 
misapplication. 

Limitation of Liability 

The hardware warranty set forth in this agreement replaces all other 
warranties. Icron Technologies Corporation expressly disclaims all other 
merchantability and fitness for a particular purpose and non-infringement of 
third-party rights with respect to the hardware. Icron Technologies 
Corporation dealer, agent, or employee is authorized to make any 
modification, extension, or addition to this warranty. Under no 
circumstances will Icron Technologies Corporation, its suppliers or licensors 
be liable for any costs of procurement or substitute products or services, lost 
profits, loss of information or data, or any other special, indirect, 
consequential, or incidental damages arising in any way out of the sale of, 
use of, or inability to use Icron Technologies Corporation product or service, 
even if Icron Technologies Corporation, its suppliers or licensors have been 
advised of the possibility of such damages. In no case shall Icron 
Technologies Corporation, its suppliers and licensors’ liability exceed the 
actual money paid for the products at issue. Because some jurisdictions do 
not allow the limitation of implied warranties of liability for incidental, 
consequential, special, or indirect damages, the above limitation may not 
always apply. The above limitations will not apply in case of personal injury 
where and to the extent that applicable law requires such liability. 

 

Содержание DVI Ranger 500





















Отзывы: