ICRealtime HDAVS Series, Руководство пользователя

Страница: 19 / 22

13

Tour speed
It is to adjust tour speed via adjusting the parameter, it can properly increase tour speed
for the monitoring scenario with quick change of object or human.

Tour left limit
The left limit of 180
°
field angle is considered as tour left limit by default, it will appear
white rectangular box after setting menu. It can adjust via left and right buttons and
confirm tour left limit
according to the left location of rectangular box, click “Enter” to
complete setting, and it will auto pop out tour left limit and set menu.

Tour right limit
The right limit of 180
°
field angle is considered as tour right limit by default, it will appear
white rectangular box after setting menu. It can adjust via left and right buttons and
confirm tour right limit according to the right
location of rectangular box, click “Enter” to
complete setting, and it will auto pop out tour right limit and set menu.

Area Setting
Area setting is mainly divided into size setting and location setting.
Size: adjust the size of white rectangular box after entering size setting menu, and then it
will generate the effect of local zoom in and zoom out.
Location: Adjust the UDLR location of white rectangular box after entering location setting
menu, and then it will set the exact tour area.
5.3 Image Adjust
Select
“Main Menu > Image Adjust” to set the image parameter of the camera, which it to
increase the definition of monitoring scene.
5.3.1 Image Mode
The image display mode which is preset by the system.

Standard: the standard mode of image display, each parameter is the system default.

Soft: compared to standard mode, it mainly lowered saturation and sharpness.

Flamboyant: compared to standard mode, it mainly enhanced saturation.
5.3.2 Sharpness
It is used to adjust the image definition and image edge sharpness.
The bigger the value is, the higher the detail contrast of the image plane becomes, and the
image becomes clearer. The image tends to generate noise when the value is set too high.
The range is between 0 and 15.
5.3.3 Brightness
It is used to adjust the overall brightness of the image. Users can adjust the value when the
image becomes too bright or too dark. Both the dark and bright area will be increased or
lowered equally at the same time during adjustment.
The bigger the value is, the brighter the image becomes. The image tends to be foggy or
overexposed if the value is set too high. The range is between 0 and 15.