ICRealtime HDAVS Series, Руководство пользователя

Страница: 11 / 22

5
3 Installation
Attention

Please install the device in time after it is taken apart, which is to avoid the camera
module being exposed in humid environment for a long time.

The installation ceiling or wall shall be thick enough to sustain at least 3X weight of the
camera.

As for the installation mode of side cable outlet, it has to make sure the direction of side
cable outlet is in accordance with the direction of installation position map when pasting
the installation position map, and it has to pull the cable through pedestal outlet slot and
then lock the screws firmly.

The following installation figure is for reference only.
Figure 3-1
Step 1
Take out the installation position map from the accessories bag, stick it on the ceiling or wall
④
according to the cable exit, dig holes on the installation surface according to the installation
position map,
Step 2
Install camera
 If it is cement wall, it needs to install expansion bolt
③
first (the mounting holes of
expansion bolts need to be in accordance with bracket), then use self-tapping screws to
install bracket.
 If it is wooden wall, you can just skip the first step, use self-tapping screws
②
to install
bracket directly.
Step 3
Adjust the camera to the location which needs to be monitored, tighten the screw on the
bracket and fix the camera. Please refer to Figure 3-2 for more details.