2A. INSTALLATION STEPS
MARGIN
GUIDES
Stay within the yellow
box. Do not let text go
beyond, instead move
to the next column or
start a new page.
3
|
www.icrealtime.com
Step 1
Remove the installation map from the packaging and place in
the installation surface. Drill out the appropriate mounting holes and
cable exit, if necessary after setting the position map. See Figure 2-1.
Step 2
For outdoor installation, four rubber grommets are provided for
the mounting screws to waterproof the base. See Figure 2-2.
Step 3
Remove the dome cover using the wrench provided. Thread the
cabling through the cable exit on the installation surface and install the
mounting screws as shown in Figure 2-3.
Step 4
Connect the necessary cabling to the camera. See Figure 2-4.
Figure 2-2
Figure 2-1
Figure 2-4
Figure 2-3
