ICQN BIH-I9040, Инструкция по эксплуатации

Страница: 42 / 48

18
Failure Display and Inspection
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Error
Message
Possible Cause What to do
No pot or pot not suitable; Replace the pot;
ER03 Water or pot on the glass over the control Clean the user interface
F1E
The connection between the display board and the
left mainboard is fail (the cooking zone which
indicator showing “E”) 1.Connection cable not correctly plugged or
defective;
2.Replace the Mainboard.
F3E
Coil temperature sensor failure. (the cooking zone
which indicator showing “E”)
Replace the coil sensor
F4E
Mainboard temperature sensor failure. (the cooking
zone which indicator showing “E”)
Replace the mainboard
E1E
Temperature sensor of the ceramic glass plate is
high Please restart after the induction hob cools
down.
E2 E
Temperature sensor of the IGBT is high Please restart after the induction hob cools
down.
E3 E
Abnormal supply voltage(too high) Please inspect whether power supply is normal;
Power on after the power supply is normal.
E4 E
Abnormal supply voltage (too low) Please inspect whether power supply is normal;
Power on after the power supply is normal.
E5 E
Temperature sensor failure(the cooking zone which
indicator showing “E”) Connection cable not correctly plugged or
assemble defective;
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the induction hob and
please contact the supplier.