ICP ROCKY-3782EVS, Руководство пользователя

Страница: 6 / 33

11
2.5 System Power On by Keyboard when use ATX
Power Supply
Use keyboard to turn on the system, if ATX power supply are
equipped. Make sure the option in CMOS SETUP is enabled.
• JP5 : Power on by Keyboard
3 2 1
JP5 DESCRIPTION
1-2 Disabled
2-3 Enabled
2.6 SCSI Port A/B Terminator Selection Setting
Two SCSI terminators Port A and Port B are supported, JP8 is
for Terminator Port A and JP9 is for Terminator Port B
• JP8, JP9 : Terminator Enable/Disable Setting
1
2
3
JP8, JP9 DESCRIPTION
2-3 Enable
1-2 Disable
12
3
Connection
This chapter describes how to connect peripherals, switches
and indicators to the ROCKY-3782EVS board.
3.1 Floppy Disk Drive Connector
ROCKY-3782EVS board is equipped with a 34-pin daisy-chain
driver connector cable.
• CN2 : FDC CONNECTOR
2 4 6 … 30 32 34
…
…
1 3 5 … 29 31 33
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 GROUND 2 REDUCE WRITE
3 GROUND 4 N/C
5 GROUND 6 N/C
7 GROUND 8 INDEX#
9 GROUND 10 MOTOR ENABLE A#
11 GROUND 12 DRIVE SELECT B#
13 GROUND 14 DRIVE SELECT A#
15 GROUND 16 MOTOR ENABLE B#
17 GROUND 18 DIRECTION#
19 GROUND 20 STEP#
21 GROUND 22 WRITE DATA#
23 GROUND 24 WRITE GATE#
25 GROUND 26 TRACK 0#
27 GROUND 28 WRITE PROTECT#
29 N/C 30 READ DATA#
31 GROUND 32 SIDE 1 SELECT#
33 N/C 34 DISK CHANGE#