PCISA-3717EVT-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA( Dual Display ) ,
TV-Out , Audio Board
51
Choices are: Enabled, Disabled.
USB Keyboard Support
Select
Enabled
if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard.
Choices are: Enabled, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number
of block read/writes per sector the drive can support.
The choice: Enabled, Disabled.
Init Display First
This item allows you to decide to active which bus first (PCI Slot or AGP
first).
The choice: PCI Slot, AGP.
System Share Memory Size
This item defines the System Share Memory Size for video.
The choice:2MB,4MB,8MB,16MB, 32MB, 64MB
SIS 301 Display Type
This item defines the Dual Display Type for SIS 301 chip .
The Choice : Auto , CRT1 Only , CRT1 + LCD Scaling , LCD Scaling
Only , CRT1 + A-V PAL O-Scan , CRT1 + A-V PAL U-Scan , CRT1 + A-
V NTSC O-Scan , CRT1 + A-V NTSC U-Scan , A-V PAL O-Scan Only ,
A-V PAL U-Scan Only , A-V NTSC O-Scan Only , A-V NTSC U-Scan
Only , CRT1 + S-V PAL O-Scan , CRT1 + S-V PAL U-Scan ,
CRT1 + S-V NTSC O-Scan , CRT1 + S-V NTSC U-Scan , S-V PAL O-
PCISA-3717EVT-R2 Socket 370 Celeron
TM
, Pentium III
®
& Tualatin Processor with Ethernet , VGA( Dual Display ) ,
TV-Out ,Audio Board
52
Scan Only , S-V PAL U-Scan Only , S-V NTSC O-Scan Only ,
S-V NTSC U-Scan Only , CRT1 + SCART , SCART Only , CRT1 + Hi-
TV , Hi-TV Only , CRT1 + CRT2 , CRT2 Only .
4.10 Power Management Setup
The Power Management Setup allows you to configure you system to
most effectively save energy while operating in a manner consistent with
your own style of computer use.
CMOS Setup Utility – Copyright © 1984 – 1998 Award Software
Power Management Setup
ACPI function Enabled
ACPI Suspend Type S3(STR)
Video Off Option Susp,Stby -> Off
Video Off Method V/H SYNC_Blank
Switch Function Break/Wake
Hot Key Function As Power Off
HDD Off After Disable
Power Button Override Instant Off
KB Power On Password Disable
PM Wake Up Events Press Enter
Power Up by Alarm Press Enter
Item Help
______________________
_____________
Menu Level
↑↓←→
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit
F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized
Defaults
ACPI Function
