Hotkey sequence = [SCROLL] + [SCROLL] + (y) (y) =
,
(y) =
, Local (2nd computer)
(y) =
, Remote (1st Computer)
Change the Hotkey Preceding Sequence using Keyboard Hotkey instead of OSD Menu (on Receiver console only)
To change the hotkey preceding sequence of your hotkeys, please hit the following key commands from the keyboard on the
RX unit.
Hotkey sequence = [SCROLL] + [SCROLL] + H + (y)
(y) = SCROLL, CAPS, F12 or NUM
Note that the hotkey preceding sequence setting on the RX Console will also change the hotkey preceding sequence on the TX
Console.
HOTKEYS AVAILABLE ON THE TRANSMITER CONSOLE
Change the Remote Console ON/OFF/View Only mode (on Transmitter console only)
While you are at the Transmitter Console, you can turn Remote Console On/Off or make it View Only by the following:
Hotkey sequence = [SCROLL] + [SCROLL] + M + (y)
(y) = 1, 2, 3
(y) = 1, Full access (keyboard, mouse and video)
(y) = 2, Access Denied (no keyboard or mouse and blank screen)
(y) = 3, View only (only video, no keyboard or mouse control)
When the remote console is turned OFF, the video screen will become blank and the keyboard and mouse will be disabled.
When the remote console is in View Only Mode, the user can only see the screen while access to keyboard and mouse control
are not available.
Optimize the Video Display on the Remote Console
To achieve an optimized display output on the remote console (i.e. the Receiver) you will need to adjust the various video
parameters such as Brightness and Sharpness in an optimized combination
that gives you the best video display.
Please follow the procedure below to achieve an optimized display output on your remote console screen (on RX unit):
Step 1. Choose a video display content that you think will be suitable to serve as a reference for the visual adjustment. You can
choose a document that integrates texts and graphics so that you can use it as a reference to achieve an optimized video
display for either textual or graphical content on the Receiver video output. One alternative can be the visual testing program
provided by the display card vendor.
Step 2. Adjust the Brightness and Sharpness - First, invoke the OSD menu by hitting the hotkey, Space, then
go to the Video Setting submenu. Next, adjust your video display for an optimized output. The Brightness adjustment can help
you to tune the picture luminance as a whole to lighter or darker output that best suits your visual perception. The Sharpness
is the edge contrast that you will
perceive.
Adjust the Brightness: The brighter the picture, the more luminance will be added to the picture as a whole.
Adjust the Sharpness: To add more sharpness to the picture is to help you distinguish more detail out of the edges of a line or
