7
Out-of-the-box-Installation
Take the package items out of the box and begin installation….
Plan the layout path and deploy the UTP cable for extension
Step 1.
Plan the path through which the CATx UTP cable will be deployed across the
distance between the Transmitter and the Receiver. You should choose the layout
path not only base on shortest possible length consideration, but also on least
electromagnetic interference.
Step 2.
Lay out the UTP cable according to your planned path. Configure Transmitter
Console (Console 1)
Step 3.
Connect one end of the CATx UTP cable to the CAT5 Extension port of the
Transmitter. (Connector k)
Step 4.
Connect the power adapter to the Transmitter to power it up before
connecting any computer or cables to it. (connector j)
Step 5.
Connect the Transmitter to the computer, using the Slim 3-in-1 PS/2&USB
KVM cable (connector l). (By adding the USB-to-PS/2 adapter that comes with your
cable, you can connect to computer using PS/2 connections.)
Step 6.
Set up Console 1: Connect a set of keyboard, mouse, monitor as well as a set
of speakers and microphone to the Transmitter’s Console ports (connectors c, d / e, f
and n).
Step 7.
Power on the computer, and check the keyboard, mouse, video on Console 1
to see if it works fine. If should work fine before you proceed to next steps.
Configure the Receiver Console (Console2)
Step 8.
Connect the other end of the UTP cable to the CAT5
Extension port of the Receiver (connector 11).
Step 9.
Connect the power adapter to the Receiver (connector 10) to power it up
before connecting any devices to it.
Step 10
Set up Console 2: Connect a set of keyboard, mouse, monitor to the
Receiver’s Console ports (connector 3, 4, 5, 6, 13).
