13
Change the Hotkey Preceding Sequence (Only available on Receiver
Unit)
To change the hotkey preceding sequence
(or trigger sequence) of your hotkeys, please hit the following key commands:
Hotkey sequence = [CAPS]* + [CAPS] * + H + (y)*
(y) = L_Ctrl, R_Ctrl, SCROLL
,
CAPS
,
F12
or
NUM
Note that the hotkey preceding sequence setting on the Receiver Console will not
affect the hotkey preceding sequence on the Transmitter Console, which will always
allows CAPS + CAPS as preceding hotkey. In addition to using the hotkey command,
one can also use the OSD menu to change the hotkey preceding sequence. Please
refer to the previous section.
Receiv
Remote Console ON/OFF and View Only (Hotkey Available only on
Transmitter Console)
While you are at the Transmitter Console, you can turn
Remote Console On/Off
or
make it
View Only
by the following:
Hotkey sequence = CAPS + CAPS + M + (y)** (y) = 1, 2, 3
(y) = 1, Full access (keyboard, mouse and video)
(y) = 2, Access Denied (No keyboard or mouse control, blankscreen)
(y) = 3, View Only (only video)
When the remote console is turned OFF, the video screen will become blank and
keyboard/mouse locked up. Thus, this hotkey provide a security measure for
block/grant access on remote console.
When Remote Console is in view Only Mode,
user
can only see the screen without access to keyboard and
mouse control.
