ICP Electronics WAFER-5825 Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 24

ICP Electronics WAFER-5825 Скачать руководство пользователя страница 20

39

PCI Bus Ethernet Interface

7.1 Introduction

The WAFER-5825 provides a high performance 32-bit Ethernet

chipset which is completely compliant with IEEE 802.3 100 Mbps
CSMA/CD standards. It is both 100Base-T and 10Base-T
compatible. The major network operating system fits it. The
medium type can be set up via the RSET8139.exe program
included on the utility CD.

The Ethernet port supplies a standard RJ-45 connector on

board. To utilize the network boot feature is by incorporating the
boot ROM image files for the appropriate network operating
system. The boot ROM BIOS files are combined with system BIOS,
which can be enabled/disabled in the BIOS setup.

The 8139x utility tools all in driver CDROM

Lan \ Realtek \ 8139c \

7

40

CardBus Interface

8.1 Introduction

The WAFER-5825 provides a high performance 32-bit PCI bus

Interface to CardBus interface chipset, which can support the
32-bit CardBus (Card-32), and the 16-bit CardBus (Card-16). It
also supports ZV (Zoom Video) Card control interface without
external buffers.

8.1.1 Chipset

The R5C475II is a PC card control offering a single chip solution

as a bridge between PCI bus and CardBus. Concerning the card
control interface, the R5C475II’s register set is compatible with the
Intel 82365SL and Ricoh’s RF5C396/366 in order to maintain
backward compatibility with a existing 16-bit PC Card compliant
with PCMCIA2.1/JEIDA4.2 so that the existing PC card are
available.

8

«
...
18
19
20
21
22
...
»

Содержание WAFER-5825

























Отзывы:

Нет отзывов