29
4.8 LOAD SETUP DEFAULTS
If you select 'Y' to this field, the Setup Defaults will be loaded
except Standard CMOS SETUP. The default settings are
optimal configuration settings for your system.
30
4.9 INTEGRATED PERIPHERALS
This option is used to assign Onboard I/O, IRQ, DMA etc. If
you don't know how to configure them, just press <F7> to load
Setup Defaults.
The flat panels will then be applied with two modes: 640x480 or
800x600, for which it need to set up from BIOS for proper flat
panel resolution.
Build in CPU Audio -- Enabled, Disabled
To disable or enable the audio function.
Audio I/O Base Address -- 220H, 240H, 260H, 280H
To select the I/O address for the audio function.
MPU-401 I/O Base Address -- 300H, 330H, Disabled
To select the I/O address for the MPU-401 (midi interface) function.
Audio IRQ Select -- 5, 7, 10, Disabled
To select the interrupt for the audio function.