44
AC97 Audio
This item allows you to decide to enable/disable the 810E
chipset family to support AC97 Audio.
The Choice: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or
multiple sector read/write. If your IDE hard drive supports
block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector
the drive can support.
The Choice: Enabled, Disabled
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the system board and you wish to use it. If you
install and-in FDC or the system has no floppy drive, select
Disabled in this field.
The Choice: Enabled, Disabled
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and
second serial ports.
The Choice: 3F8/IRQ4, 2E8/IRQ3, 3E8/IRQ4, 2F8/IRQ3,
Disabled, Auto
UART Mode Select
Select a serial port 2 operation mode.
The Choice: Normal, IrDA, ASKIR, SCR