PCISA-3717EVT Socket 370 Celeron
TM
& Pentium III
®
with Ethernet , VGA( Dual Display ) ,
TV-Out , Audio Board
11
2.3 Unpacking Precautions
Some components on PCISA-3717EVT are very sensitive to static
electric charges and can be damaged by a sudden rush of power.
To protect it from unintended damage, be sure to follow these
precautions:
Ground yourself to remove any static charge before touching your
PCISA-3717EVT. You can do it by using a grounded wrist strap at
all times or by frequently touching any conducting materials that is
connected to the ground.
Handle your PCISA-3717EVT by its edges. Don’t touch IC chips,
leads or circuitry if not necessary.
Do not plug any connector or jumper while the power is on.
Do not put your PCISA-3717EVT unprotected on a flat surface
because it has components on both sides.
PCISA-3717EVT Socket 370 Celeron
TM
& Pentium III
®
with Ethernet , VGA( Dual Display ) ,
TV-Out ,Audio Board
12
2.4 Setting the CPU of PCISA-3717EVT
•
JP1,2,3,4 :
CPU & DRAM FREQUENCY SETTING ( H/W )
2
1
CPU/DRAM
JP1 JP2 JP3 JP4
66/66 O O O C
100/100
O
O
C
O
133/133 C C C O
O : Open
C : Close
2.5 Clear CMOS Setup
If you forget the CMOS password, you can clear or reset it by
closing the
JP5
. After JP5(1-2) is closed, turn on the power for
about 3 seconds then turn it off and open the JP5(1-2). Now,
the password has been cleared from your CMOS.
•
JP5 : Clear CMOS Setup
1
2
3
PIN NO.
DESCRIPTION
2-3
Normal Operation
1-2
Clear CMOS Setup