18
Appendix B Panel Support List
JUKI-752 supports a wide range of flat panels. The different flat panel will need
different LCD drive BIOS. The default setting is for Color DSTN flat panel. The
available BIOS for different panels are in the following list. Please note all the
BIOS files already included the system BIOS and LCD drive BIOS, customer only
need to re-program the BIOS flash chip with the file, and then power on again.
18MLCD.ROM – BIOS for MONO DSTN 640x480
For example: HOSIDEN HLM6667
HITACHI LMG5160XUFC
CASIO MD650TS00-01
OPTREX DMF_50260NFU-FW-8
18DSTN.ROM – BIOS for Color DSTN 640x480
For example: SANYO LCM-5331-22NTK
SHARP LM64C35P
18TFTS1.ROM – BIOS for TFT 640x480-SYNC (16-bit)
18TFTS2.ROM – BIOS for TFT 640x480-SYNC (18/24-bit)
For example: HITACHI TX26D60/TX24D55
TOSHIBA LTM09C015A
SHARP LQ10D321
18TFTLP1.ROM – BIOS for TFT 640x480-LP(16-bit)
18TFTLP2.ROM – BIOS for TFT 640x480-LP(16/24-bit)
For example: TOSHIBA LTM09C015A
18TFT861.ROM – BIOS for TFT 800x600-SYNC(16-bit)
18TFT862.ROM – BIOS for TFT 800x600-SYNC(18/24-bit)
For example: NEC NL8060AC26-05
NEC NL8060AC26-04
NEC NL8060BC31-02
18EL.ROM – BIOS for EL 640x480
For example: PLANAR EL640.480-A
18PLASMA.ROM – BIOS for PLASMA 640x480
For example: PANASONIC S817
How to update the BIOS by yourself?
1. Use EPROM Programmer setting the right Flash type and then write the file
into the Flash. To use this method, you should carefully take the Flash
chip out of socket and then put it back after finish the programming. Usually
the flash type is: ATMEL AT29C010A
Or,
2. There also have a utility (FLASH631.COM) and directly re-program the BIOS
under DOS. For example: C:>FLASH631 MLCD.ROM
