38
4.11 IDE HDD AUTODETECTION
This option detects the parameters of an IDE hard disk drive
(HDD sector, cylinder, head, etc) automatically and will put
the parameters into the Standard CMOS Setup screen. Up
to 2 IDE drives can be detected and the parameters will be
listed in the box. Press <Y> if you accept these parameters.
Press <N> to skip the next IDE drives.
Note: If your IDE HDD was formatted in previous older system, incorrect
parameters may be detected. In this case, you need to enter the correct
parameters manually or low-level format the disk
4.12 SAVE AND EXIT SETUP
Select this option when you finish setting all the parameters and
want to save them into the CMOS. Just simply press <Enter> key
and all the configuration changes will be saved
39
4.13 Quit Without Saving
Select this option if you want to exit the Setup without saving
the changes that you made. Just simply press <Enter> key
and you will exit the BIOS SETUP without saving the
changes.