2
3.16 Digital I/O (CN27)................................................................ 26
AWARD BIOS Setup ........................................................ 28
4.1 Getting Start............................................................................ 28
4.2 Standard CMOS Setup............................................................ 29
4.3 BIOS Features Setup .............................................................. 30
4.4 Chipset Features Setup ........................................................... 31
4.5 Power Management Setup ...................................................... 32
4.6 PNP / PCI CONFIGURATION .............................................. 33
4.7 LOAD BIOS DEFAULTS ...................................................... 34
4.8 LOAD SETUP DEFAULTS ................................................... 35
4.9 INTEGRATED PERIPHERALS............................................ 36
4.10 PASSWORD SETTING ....................................................... 37
4.11 IDE HDD AUTODETECTION............................................ 38
4.12 SAVE AND EXIT SETUP.................................................... 38
4.13 Quit Without Saving ............................................................. 39
SVGA Setup........................................................................... 40
5.1 Introduction ............................................................................ 40
5.2 Further Information ................................................................ 41
Audio ..................................................................................... 42
6.1 Introduction ............................................................................ 42
PCI Bus Ethernet Interface .................................................... 43
7.1 Introduction ............................................................................ 43
Appendix A. Watchdog Timer................................................. 44
Appendix B. I/O Address Map................................................ 47
B.1 System I/O Address Map ....................................................... 47
B.2 DMA channel assignments .................................................... 47
B.3 Interrupt assignments ............................................................. 48
B.4 1
st
MB memory map .............................................................. 49
3
Introduction
JUKI-511P is designed for limited space applications with only
the half size . It supports the full functions of an AT&
ATX-compatible industrial computer on a single board.So it
provides wake on LAN and Modem. The JUKI-511P is equipped
with a low-power consumption and high performance GXLV/GX1
processor on board. It also contains an SDRAM DIMM socket
that can support up to 256 MB memory.
The JUKI-511P provides an Ethernet interface, audio interface,
Compact Flash Type II, EIDE interface, one parallel port, Two
RS-232 serial ports, and a PS/2 keyboard/mouse interface. The
built-in SVGA/LCD display controller supports both the CRT and
LCD display simultaneously. It offers the resolutions of LCD
screen up to 1024 x 768 and CRT resolutions up to 1280 x 1024
@ 256 colors &1024x 768 @ 16 bpp. It also provides TV-OUT
interface for PAL or NTSC TV. The display type is configured by
software utility. The Flash ROM contains both the system BIOS
and the VGA BIOS. Reprogramming the Flash ROM could do
modification, in case of necessary.
1
