background image

 

3

1.

 

Product Introduction 

 

Thank you for choosing IEI IVC-100G/100, IVC-200G/200 and IVC-120G/120 & 
PM-1056 video capture cards.    These cards enable users to capture live video 
from video source such as the CCTV camera.    These cards are PCI compliant.   
IVC-100G/100 and IVC-200G/200 have four video input channels and an LED 
indicator.    VC-120G/120 has 16 channels and an LED indicator.    This unique 
LED feature makes IVC-100G/100, IVC-200G/200 and IVC-120G/120 & 
PM-1056 ideal candidates for multi-cards surveillance systems.    The 
patent-pending LED feature provides a solution to system upgrading and 
management.    With the help of the LED, users can quickly assign an ID number 
to the card for identification, which makes onsite maintenance easier and more 
efficient.    The operation and driver for PM-1056-4P/4PB/4PG/4PGB and 
IVC100/100G, and that for PM-1056-16P/16PG and IVC-120/120G, are the 
same. 

 

1.1

 

Common Features for IVC-100G/IVC-100 

 

Total frame rate up to 30 frames per second   

 

4 channels of BNC composite video input 

 

LED indicator for easy system management 

 

NTSC/PAL/SECAM auto sensing 

 

Resolution (NTSC): 720x480, 704x480, 640x480, 352x240, 
320x240, 176x112 

 

Resolution (PAL): 720x576, 704x576, 640x576, 352x288, 176x144 

 

Provide WDM driver for Windows 98 SE, Windows ME, Windows 
2000 and Windows XP 

 

Provide Demo Programs and SDK for Windows 

 

Provide Linux driver for Red Hat 7.2, 7.3, 8.0 

 

1.2

 

Common Features for IVC-200G/IVC-200 

 

Total frame rate up to 120 frames per second   

 

4 channels of BNC composite video input 

 

LED indicator for easy system management 

 

NTSC/PAL/SECAM auto sensing 

 

Resolution (NTSC): 720x480, 704x480, 640x480, 352x240, 
320x240, 176x112 

 

Resolution (PAL): 720x576, 704x576, 640x576, 352x288, 176x144 

 

Provide WDM driver for Windows 98 SE, Windows ME, Windows 

Содержание IVC-100G




































Отзывы: