Overview
The EBDSPIR-AT-AD is a passive infrared (PIR) motion
sensor combined with two output channels capable of
controlling incandescent, fluorescent and compact
fluorescent lighting.
Output Channel 1 comprises a mains voltage relay capable
of simple on/off switching, while Output Channel 2 provides
dimmable control of 1-10V ballasts.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty. Optional settings allow lights to be turned off in
response to ambient daylight, or to implement a maintained
illuminance (constant light) system. The unit also includes
stored scenes for versatile manual control of lighting levels.
The EBDSPIR-AT-AD can be used as a standalone unit or
integrated with other devices as part of a system. The
built-in RF transceiver allows wireless communication with
all other
An-10
®
compatible products, e.g. the AT-BB-IN
Input Unit, useful for push-button scene selection and
absence detection.
All functionality is fully programmable.
Features
PIR Sensor
Detects movement within the unit’s detection range,
allowing load control in response to changes in occupancy.
IR Receiver
Receives control and programming commands from an
IR (infrared) handset.
Light Level Sensor
Monitors the ambient light level, allowing load control
based on minimum and maximum Lux Level and also for
providing Maintained Illuminance (constant light) control.
Status LEDs
These flash
R
ed and/or
G
reen to indicate the following:
Power Input & Switched Output Connector
(Channel 1)
Used to connect mains power to the unit and to connect a
switched load.
Dimmable Control Output Connector
(Channel 2)
Used to connect 1-10V controllable ballasts and
transformers for dimmable loads.
Front features
Back features
Walk Test LED active
when movement is detected
Valid setting received
Invalid setting received
Software reset received
Factory reset received
RF ceiling PIR presence detector – 1-10V dimming
EBDSPIR-AT-AD
Product Guide
