ICP DAS USA ZT-257 Series Скачать руководство пользователя

Страница: 4 / 49

ICP DAS, ZT-257x DIO Data Concentrator Quick Start Guide, v1.0

Page 2

Overview of the ZT-257x Series

The ZT-2570 and ZT-2571 series modules are small-sized wireless ZigBee converters based on

the IEEE802.15.4 standard that allow devices based on the RS-232, RS-485 and Ethernet

interfaces to be integrated into a personal area ZigBee network. In addition, the transmission

frequency can be adjusted in the range from 2405 MHz to 2480 MHz, separated into 5 MHz

sectors, providing 16 channels and 16384 PAN IDs (i.e., Pan ID, 0x0000 to 0x3FFF).

The ZT ZigBee series of products conform to the ZigBee 2007 (ZigBee Pro) specifications

developed by the ZigBee Alliance for a suite of high-level communication protocols using

small, low-power digital radio modules. Only one ZigBee Host, e.g., a ZT-2570 module, can be

used in a single Z

igBee network. This module is known as the “ZigBee Coordinator”, and is

used to manage the network initialization and routing. In addition, up to 255 ZigBee Slave

devices can be used in a single ZigBee network. Each of these devices is defined as a “ZigBee

Router”, and can be used to receive or forward data to or from a nearby node.

Further information related to the

ZT-2570

(Host, ZigBee Coordinator) and the

ZT-2571

(Slave,

ZigBee Router) series of converters can be found at:

http://www.icpdas.com/root/product/solutions/industrial_wireless_communication/

wireless_solutions/zt-2570.html

Содержание ZT-257 Series


















































Результаты поиска

Содержание ZT-257 Series

Отзывы:

Похожие инструкции для ZT-257 Series

Бренды по названию

Популярные бренды

ICP DAS USA ZT-257 Series, Быстрый старт

Результаты поиска

Содержание ZT-257 Series

Отзывы:

Похожие инструкции для ZT-257 Series

Бренды по названию

Популярные бренды