ICP DAS USA WISE-2841 Series Скачать руководство пользователя

Страница: 69 / 326

ICP DAS WISE User Manual

http://wise.icpdas.com

Figure 6-18

：

I-7000/DL Module DO Channel Setting page

The settings are as below:



Nickname: For user to define nickname for the module and the I/O

channels, these nicknames will be displayed on the “Channel
Status” and “Rule Setting” pages.



For I-7000/DL DCON DO channels, WISE provides the “Auto
OFF” and “DI Status Mapping” advanced functions, select the

function from the dropdown list:



Auto OFF: When “Auto OFF” is selected, it allows this DO

channel to enable Auto OFF function. It is required to set up a

time interval, when this DO channel is set to be “ON” and the

duration of the ON status reaches the pre-set time interval, the

DO channel will automatically be set to OFF. The unit is

second.



DI Status Mapping: When “DI Status Mapping” is selected,

the status of the DI channel with the same channel number on

the I-7000/DL DCON module will be copied to the DO
channel. For example, when the “DI Status Mapping” is

enabled on DO0, when the DI0 status is ON, DO0 will set to

be ON, and when the DI0 status is OFF, DO0 will set to be

OFF as well.

After all settings of the DO channels are completed, continue the

configuration of other channels, and after all channel settings are
completed, click “OK” button to save the changes and return to

Содержание WISE-2841 Series







































































































































































































































































































































Результаты поиска

Содержание WISE-2841 Series

Отзывы:

Похожие инструкции для WISE-2841 Series

Бренды по названию

Популярные бренды

ICP DAS USA WISE-2841 Series, Руководство пользователя

Результаты поиска

Содержание WISE-2841 Series

Отзывы:

Похожие инструкции для WISE-2841 Series

Бренды по названию

Популярные бренды