ICP DAS USA WISE-2841 Series Скачать руководство пользователя страница 66

Страница: 66 / 326

ICP DAS WISE User Manual

http://wise.icpdas.com

iv.

Input the Nickname for the I-7000/DL DCON modules.

Click

to add the I-7000/DL DCON module to the list. After

adding the I-7000/DL DCON module, click “Save” button to save
the changes.

Figure 6-15

：

Add the I-7000/DL Module manually

6.3 I-7000/DL DCON Module List Operation Interface

After the I-7000/DL DCON modules are added to the I/O Module list via

auto scan or manual work, the I-7000/DL DCON modules will be listed as

below:

Figure 6-16

：

I-7000/DL Module List Operation Interface

The following functions allow to perform settings or rearrange order of the

I-7000/DL DCON modules. Please select the I-7000/DL DCON module and

click on the function button to perform the operations:



Setting: Click the radio button in front of the I-7000/DL DCON

module and click on “Setting” to get into the setting page of the

I-7000/DL DCON module. The settings for each I-7000/DL DCON

module will be given in the following section.



Move Up: Click the radio button in front of the I-7000/DL DCON
module and click on “Move Up” to move the I-7000/DL DCON

Содержание WISE-2841 Series







































































































































































































































































































































Результаты поиска

Содержание WISE-2841 Series

Отзывы:

ICP DAS USA WISE-2841 Series, Руководство пользователя, Страница: 66 / 326

Результаты поиска

Содержание WISE-2841 Series

Отзывы: