VXC-112(i)(A)U/142(i)AU/182i(A)U/114(iA)U/144(i)U, VEX-114(i)/144(i) , VEX-112(i)/142(i) User’s Manual (Ver. 1.5
Aug.10 2012) -----48
5. Once the configuring has done successfully, type “
make
” to build all.
Script “
./ixcom.inst
” loads modules automatically. Script “
./ixcom.remove
” removes the
loaded modules. The root privilege is required when installing or removing these kernel
modules.
3.6.3 Access to VXC/VEX Serial Port
Script “
ixcom.inst
” will establish unused device major number dynamically and create
correspond device node for access VXC/VEX serial port.
Use “
dmesg
” command to inspect the driver output message.
Note:
If you like to install files to system directory, the make install will do it for you. However,
install files to system directory is not necessary for further operation. You will need the root
privilege for that.
# ./ixcom.inst
IxCOM Installer 0.5.0
Check kernel version... 2.6
Use proc-file /proc/icpdas/ixcom
Load module ixcom
dmesg
………
………
ICPDAS VXC multi-serial card Serial driver version ixcom-0.8.1 (2007-08-21)
Found ICPDAS VXC-114U series board(BusNo=0,DevNo=20)
PCI: Found IRQ 11 for device 0000:00:14.0
PCI: Sharing IRQ 11 with 0000:00:07.2
PCI: Sharing IRQ 11 with 0000:00:14.1
ttySV0 at port cc00 (irq = 11) is a 16C950/954
ttySV1 at port d000 (irq = 11) is a 16C950/954
ttySV2 at port d400 (irq = 11) is a 16C950/954
ttySV3 at port d800 (irq = 11) is a 16C950/954
