USB-87P1/2/4/8 User Manual, version: 1.4
61
Table 2 : The Error Code in Auto Config. Disable mode
Error
Code
Slot LED
(Red)
Status
Description
Solution
80H
Dark (ok)
Initialize ok
setup success
None
81H
Bright
(Error)
Internal INIT*
pin failed
The INIT Pin is failed to connect with the
GND and module failed to initialize.
If it still fails after restart the 87Pn many times,
please send the 87K I/O module back to factory
to check.
82H
Bright
(Error
)
Module
address over
255 (FFh)
The module address is over 255 (FFh).
The maximum address of
87P1 is 254 (FEh)
87P2 is 253 (FDh)
87P4 is 251 (FBh)
87P8 is 247 (F7h)
You can see the LED signals on 87Pn CPU module to know whether the 87Pn is operating properly. Please refer to appendix.
Auto Config. LED
(Green)
S.RDY LED
(Green)
Slot Status LED (Red)
Auto Config.
Enable
No Error
Always ON
Always ON
Always OFF
Warning
Always ON
Flash
Failed
Flash
Always ON
Auto Config.
Disable
No Error
Always OFF
Always ON
Always OFF
Failed
Flash
Always ON
Содержание USB-87P1
Страница 14: ...USB 87P1 2 4 8 User Manual version 1 4 14 USB 87P4 USB 87P8 Front View Front View...
Страница 24: ...USB 87P1 2 4 8 User Manual version 1 4 24 10 Click the I O module name to view real time data on the module...
Страница 41: ...USB 87P1 2 4 8 User Manual version 1 4 41 3 Wait for OK messages for each slot to appear in the bottom pane...