ICP DAS USA USB-87P1, Руководство пользователя

Страница: 5 / 62

USB-87P1/2/4/8 User Manual, version: 1.4
5
Features

Hot Swap
The USB-87Pn doesn
’t need to shut down its power to replace or plug I-87K I/O modules.
Therefore, the whole system can keep operating without any interruption.

Auto-Configuration
Configurations of I-87K I/O modules can be pre configured and stored in the nonvolatile
memory of the USB-87Pn. When the USB-87Pn is power on or an I-87K I/O module is
plug in, the USB-87Pn automatically check and restore these configurations to each
I-87K I/O modules on it.

Easy Duplicate System
Using the DCON Utility Pro, you can easily make a backup of the I-87K module
configurations and write to another USB-87Pn. This design can easily and quickly
duplicate multiple USB-87Pn units with the same configuration.

Easy Maintenance and Diagnostic
The basic configurations (Auto Config, ON/OFF) are set by the DIP switch. The operator
can use only one screwdriver to set the USB-87Pn. And there are several LED status
indicators to show whether I-87K modules are configured and work properly.
If one I-87K module is damage, the user just need to get a new module of the same
model to replace the damaged one. And then check the LED indicators to know whether
the replacement is performed correctly. The design of Auto Config dip switch and slot
LED indicators are helpful for ease maintenance with no need of a PC or a laptop.
Configuration