1.
Power Supply: +1
2 ~ +48 VDC
(Ex: DP-665)
2.
Ethernet Hub or Switch (Ex: NS-205)
3.
PC/NB: Can connect to the network and set the network
Connect the UA-2200 with the RJ-45 Ethernet port to an
Ethernet hub/switch and PC. You can also link directly the
UA-2200 to PC with an Ethernet cable.
After power is connected, please
【
wait 1 minute
】
for UA-2200
start-up procedure. When the "RUN" "PWR" lights start flashing,
it represents the boot is complete.
Preparations for Devices
Hardware Connection
Power Supply
(12 ~ 48 VDC)
VS+
GND
Ethernet
Cable
Ethernet
Cable
Hub/Switch
P.GND
PWR
LAN1
