ICP DAS USA tZT-P4C4, Быстрый запуск

Страница: 3 / 4

Technical support: service@icpdas.com P3
5
Communication Test
Once the tZT-P4C4 has joined the ZigBee network, the signal quality
can be confirmed by monitoring the status of the ZigBee Net LED
indicators. If the LED indicator shows a steady light, communication with
the tZT-P4C4 has been successfully established for data acquisition and
control.
ICP DAS also provides the “DCON Utility”, which can be used to
simulate DCON/Modbus communication. This software can also be
used to verify the device settings and ZigBee I/O functions.
※
The DCON Utility can be download from:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/
 Simulate I/O channel operating via using DCON Utility
1)
Launch DCON Utility and select the correct COM Port settings to
connect the ZigBee Coordinator (ZT-2550/ZT-2570).
2)
Clicking “Search” button will start searching which tZT-P4C4 is in
the same ZigBee network.
3)
If there is any tZT-P4C4 displayed, double clicking the “module
name” will start the I/O channels operated platform.