tWF-DA1PD2R1 User’s Manual
tWF-DA1PD2R1
User’s Manual (Rev1.0, APR./2019) ------------- 19
3.1.4
Standalone Function mode Configuration
Timing control is a standalone function in tWF-DA1PD2R1, it can enable by PC
utility, Android APP and Web, it can be trigger by both DI pin, and follow the setting
to operate the DO and AO, the prefer application is Simplify Light Control system.
Function Mode Enable
: Enable or Disable the global function.
DI Trigger Type
: Define the DI trigger mode, DI close to GND or DI open from
GND.
DO output select
: Define which DI or both can be trigger DO, when both DI been
trigger, DO will release until the last DI release.
Delay to ON
: The track bar set the delay time to turn on the DO.
Time to Hold
: Set the time to hold DO “ON” after the last DI release.
DAC output select
: Define which DI or both can be trigger DA, when both DI
been trigger, DA will release until the last DI release.
Delay to ON
: Set the delay time to start the DA output.
Off value
: Set the DA value for idle “OFF”.
On value
: Set the DA value for turn “ON”.
Ton value
: Set the time from “OFF” rising to “ON”.
Thold value
: Set the time to hold when turn “ON”.
Toff value
: Set the time from “ON” falling to “OFF”.
Load/Save File button:
Load/Save config file(*.tcf) from/to local storage.
Read/Write Device button:
Read/Write config from/to target device.
