TPD/VPD Series – Programming Guide v.1.0.6
Page 64
Copyright@ 2020 ICP DAS CO., LTD. All Rights Reserved. E-mail: [email protected]
c.
Double-click on the function block to set the function to it. Here we set it the function,
“Get_Date_Time”, of the category, “system”.
d.
Double-click on the neighborhood of the input parameter “year” as below figure.
e.
Select variable “Year” to store the output of “Get_Date_Time” block.
f.
Repeat these steps to let all Virtual Tag correspond to the outputs of
“Get_Date_Time” block, as shown in the picture below.
d.
e.
