TPD/VPD Series – Programming Guide v.1.0.6
Page 39
Copyright@ 2020 ICP DAS CO., LTD. All Rights Reserved. E-mail: [email protected]
3.1.4
Demo 4 (Remotely control the ICPDAS I/O model)
Demo 4
is programmed using the C language and implements that remotely control the
ICPDAS I/O model.
In this demo, we use the ICPDAS M-7055 model to demonstrate. This demo will use the
switch on the screen of the TPD model to control the DO of the M-7055 model, and the
TPD also update the DI status of the M-7055 model at any time on its screen.
Please connect the DI0 pin and the DO0 pin of the M-7055 model. Please refer the manual
of M-7055 to view the detailed wiring.
Step 1: Create a new TPD-703-64 project based on the C language (refer to
Select the device
a.
Enter a project
name
Enter the default directory
for saving the project
c.
Select the HMI display
orientation
d.
Select the
programming type
e.
b.
