Tiny Serial-to-Ethernet Device Server
Copyright © 2016 ICP DAS CO., Ltd. All Rights Reserved.
-
55 -
1.
Confirm that the tDS-700 modules are functioning correctly. Refer to
Chapter 3 Setting up the
tDS-700 module
for more details.
2.
Wire the slave device (Ex: M-7015, optional) with your tDS-700. For detailed RS-422/485 wiring
information, refer to
section
2.7 “Wiring Notes
for RS-232/485/422 Interfaces
”
.
3.
Supply power to the slave device (Ex, M-7015, Device ID: 2, +10~+30 VDC power used.)
4.
Install VxComm utility, and then configuration Ethernet setting (
such as
IP/Mask/Gateway
details)
for tDS-700 series module; refer to
Chapter 3 Setting up the tDS-700 module.
5.
Confirm the serial port settings (
baud Rate and data format
) must be the same between the
tDS-700 and slave device (M-7015).
For example:
Model
Port Settings
TCP Port
Baud Rate
Data Format
tDS-700
9600
8,N,1
10001
Slave Device (M-7015)
9600
8,N,1
-
6.
Right click
in the “
Configure Port
”
area and then choose the
“
Open TCP
Port”
item under the
VxComm utility.
