PROFI-5053 PROFIBUS DAQ Module - QuickStart (Apr/2017)
ICP DAS USA, Inc.
|
www.icpdas-usa.com
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
2
PWR ON &
Module is in clear mode
N/A
RUN ON
or operation mode.
PROFI-5017/ PROFI-5017C/ PROFI-5018/ PROFI-5024
It provides three types of status indicator, they are PWR
LED (yellow), ERR LED (red) and RUN LED (green).
When the power is supplied to module, PWR LED will
turn on; If CHK_CFG procedure is finished, RUN LED will
turn on and ERR LED will turn off. The table explains the
relationship between them.
Status Indicator
Meaning
Recommend solution
ERR ON &
Offline Mode
Check the address setting of
RUN OFF
module and DP-master.
ERR Flash(0.1 sec) Stop Mode
Check the DP-Master is ready
to communicate with module.
Check the setting of module in
ERR Flash(0.5 sec) Prm Fault
the master interface and make
sure of the consistency.
ERR Flash(1 sec)
Cfg Fault
Same as above
ERR ON & RUN
Clear Mode
Sets the DP-Master from clear
ON
mode to operation mode
ERR OFF &
Operate Mode
RUN ON
PWR &
Diag Exist
Check the Input/Output value
ERR Flash
(Diag. Msg.
that if exceed/under the limit
lnterlace(0.5 sec)
Request)
