ICP DAS USA PM-2133D Series, Руководство пользователя

Страница: 21 / 39

PM
-
2133D User’s Manual v1.00 Last Revised: Feb. 2020 Page: 21
Copyright © ICP DAS Co., Ltd. All Rights Reserved. www.icpdas.com

E-mail: service@icpdas.com

After completing the setting of units digit, press the "Enter" button, the tenths
digit
of the PT ratio will blink. Press the "▲" button and "▼" button to adjust the
setting of tenths digit.

After completing the setting of tenths digit, press the "Enter" button, the
hundredths digit of the PT ratio will blink
. Press the "▲" button and "▼" button
to adjust the setting of hundredths digit.

: CT ratio setting. The range is from 1 to 65535.

Press the "Enter" button, the ten thousands digit of the CT ratio will blink. Press
the "▲" button and "▼" button to adjust the setting of ten thousands digit.

After completing the setting of ten thousands digit, press the "Enter" button, the
thousands digit
of the CT ratio will blink. Press the "▲" button and "▼" button
to adjust the setting of thousands digit.

After completing the setting of thousands digit, press the "Enter" button, the
hundreds digit
of the CT ratio will blink. Press the "▲" button and "▼" button to
adjust the setting of hundreds digit.

After completing the setting of hundreds digit, press the "Enter" button, the tens
digit
of the CT ratio will blink. Press the "▲" button and "▼" button to adjust
the setting of tens digit.

After completing the setting of tens digit, press the "Enter" button, the units
digit
of the CT ratio will blink. Press the "▲" button and "▼" button to adjust
the setting of units digit.

: Wiring mode setting.

Press the "Enter" button, the current Wiring mode setting will blink.

Press the "▲" button and "▼" button to adjust the Wiring mode setting. There
are 5 options: 1P2W(
), 1P3W( ), 3P3W2CT ( ),
3P3W3CT( ) and 3P4W3CT( ) for selection.

: Display Voltage setting.

Press the "Enter" button, the current Display Voltage setting will blink.

Press the "▲" button and "▼" button to adjust the Display Voltage setting.
There are 3 options: Automatic(
), "Show as Vln" ( ) and
"Show as Vll" ( ) for selection. Please refer to the Q12 of "Appendix
1: Questions & Answers" section before change the setting of Display Voltage.
iii. After completing the setting, press the "Enter" button to save the new setting.