P8
(1).
Click the “Connect to …” item to open the “Connect” frame of Utility.
(2).
Select the necessary PISO-CAN200U-FD module.
(3).
On the “CAN Setting location, user can set the CAN operation mode, bit
rate and filter prarameters. For detail information, please refer to section
“2.4. Software Utility” of user’s manual.
(4).
Press the “Active” buttom to start to use the above setting to send/receice
CAN messages.
Step 4: Send, receive CAN/CAN FD messages
By using the PISO-CANFD Utiltiy tool, user can send and receive
CAN/CAN FD messages via the board.
Send CAN/CAN FD messages and check received CAN/CAN FD
messages.