PISO-CANFD series CAN FD card User Manual (version 1.0.0)
Page: 12
Copyright © 2021 ICP DAS Co., Ltd. All Rights Reserved.
E-mail: [email protected]
1.3.4. Terminal Resistor Jumper Settings
The following provides a description of the resistor jumpers for the CAN Bus terminal
resistor, which can be used to enable or disable the terminal resistor of PISO-CANFD
series board.
Jumper
Description
Status
JP2
Used to enable or disable the 120
Ω
terminal
resistor for CAN Bus Port1.
JP3
Used to enable or disable the 120
Ω
terminal
resistor for CAN Bus Port2.
JP4
Used to enable or disable the 120
Ω
terminal
resistor for CAN Bus Port3.
JP5
Used to enable or disable the 120
Ω
terminal
resistor for CAN Bus Port4.