ICP DAS USA PET-7060, Руководство пользователя

Страница: 43 / 156

PET-7000 DIO User Manual, May 2009, V1.00, EMH-013-10----------
43
Chapter 3 Web Configuration Page
DHCP Select this option If there is a DHCP
server on the network, the IP address
can be assigned automatically by the
server.
0 (Disable)
1(Enable)
0 (Disable)
Firmware
Ver. Firmware Version and Date
N/A
Varies depending
on the Module
MiniOS7
Ver. MiniOS7 Version and Date
N/A
Varies depending
on the Module
DHCP function
DHCP (Dynamic Host Configuration Protocol) is a method used to dynamically assign
temporary numeric IP addresses as required.
If the DHCP function is enabled and the PET-7000 cannot get a dynamic IP address from the
DHCP server on boot up, the PET-7000 module will automatically load the IP/Mask/Gateway
address saved in the EEPROM. It may occur if the DHCP server is unavailable or if the
Ethernet cable/device between the module and the Host PC is damaged.
In this situation, the PET-7000 will not continue to make requests to the DHCP server until the
next reboot, even if the DHCP function is enabled.
Notes:
z For correct IP/Mask/Gateway address information, please consult the network
administrator.
z
If you don’t have a DHCP server available on the network, it is recommended to
set the DHCP disabled.