port to a .txt file.
Save Reception List:
Save Receive List, is used for saving the
CAN messages that is received on the reception list. The data in
the reception list of each different CAN port will be saved into
different .txt file except that the reception list has no message.
For example, if users want to save the data in the reception list to
“test.txt“ file, generally, these data will be saved to four .txt files,
text_port01.txt, text_port02.txt, text_port03.txt, and
text_port04.txt when users using PISO-CAN400. If the reception
list of the port 2 has no data, the text_port02.txt file will not be
produced.
Update Firmare:
Update firmware of the CAN board. This
function can not be used to the PISO-CAN, PEX-CAN, and
PCM-CAN, it only for PISO-CM100/U, PISO-CPM100/U, and
PISO-DNM100/U.
Configuration Menu:
Board Configuration:
Users can click “Board Configuration” to
re-configure the CAN board. Please refer to “(1) CAN Configure
Dialog” of this section for more detail information.
PISO-CAN/PEX-CAN/PCM-CAN Series User’s Manual (v2.6 Dec/2013) -------
79
Data Format:
In this function, user can set what kind of format
(such as hexadecimal, decimal, or ASCII) the CAN message with
specific ID will be displayed on the reception list. The setting
dialog is as follows. For example, set the data format of the byte2
~ byte6 of the CAN message with ID 0x1AA to the decimal format.
Then, the reception list will display the byte2 ~ byte 6 data of the
message with ID 0x1AA by using decimal format, and display the
other bytes of this message by using hexadecimal format. Any
message without configuring data format will be shown by using
hexadecimal format. Users can configure maximum 20 different
ID messages in this dialog.
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru