PCI-P16POR16U, PEX-P8POR8i/P16POR16i Series Quick Start Guide ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: [email protected] , [email protected]
1.
CON1/CN1:
The connector for DI/O channels 0-7. Refer to Section 5 Pin
Assignments.
2.
CON2:
The connector DI/O channel 8-15. Refer to Section 5 Pin
Assignments.
3.
SW1:
Card ID function.
Refer to PCI-P16R16 Series User Manual.
4.
J1/JP1-JP8:
Input AC or DC signals for DI 0-7. Refer to the table below.
5.
J2/JP9-JP16:
Input AC or DC signals for DI 8-15. Refer to the table below.
6.
JP2/J2:
Ground Isolated Protection Jumper. Refer to PCI-P16R16 Series User
Manual.
7.
J1:
Ground Isolated Protection Jumper for PCI-P16POR16U. Refer to
PCI-P16R16 Series User Manual.
Please make sure input signal type jumper (J1, J2, JP1-JP8 and JP9-JP16) is kept in default
setting before self-test, as follows:
Jumper
Without Filter for DC
Signal
(Default Settings)
Without AC Filter for AC
Signal
PEX-P8POR8i
PEX-P16POR16i
J1
J2
PCI-P16POR16U
JP1 – JP8
JP9 – JP16
Jumper Setting
3
1
2
3
1
2