PCI-P16POR16U, PEX-P8POR8i/P16POR16i Series Quick Start Guide ICP DAS CO., LTD.
2
WebSite: http:// www.icpdas.com.tw E-Mail: [email protected] , [email protected]
Step 1:
Setup the Windows driver. The driver is located at:
The UniDAQ driver supports 32-/64-bit Windows 2K/XP/2003/Vista/7/8; it is
recommended to install this driver for new user:
CD: \NAPDOS\PCI\UniDAQ\DLL\Driver
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
The PISO-DIO Series classic driver supports Windows 98/NT/2K and 32-bit
XP/2003/ Vista/7/8. Recommended to install this driver for have been used
PISO-DIO series boards of regular user, please refer to :
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/piso-dio/manual/quic
Step 2:
Click the
“Next>”
button to start the installation.
Step 3:
Check your DAQ Card is or not on supported list, then click the
“Next>”
button.
Step 4:
Select the installed folder, the default path is
C:\ICPDAS\UniDAQ
, confirm and
click the
“Next>”
button.
Step 5:
Check your DAQ Card on list, then click the
“Next>”
button.
Step 6:
Click the
“Next>”
button on the Select Additional Tasks window.
Step 7:
Click the
“Next>”
button on the Download Information window.
Step 8:
Select
“No, I will restart my computer later”
and then click the
“Finish”
button.
For detailed information about the driver installation, please refer to Chapter 2.1
“Getting the UniDAQ Driver DLL Installer package” of the UniDAQ SDK user manual.
Installing the Windows Driver