PCI-1002, PEX-1002 L/H Series Quick Start Guide
ICP DAS CO., LTD.
6
WebSite: http:// www.icpdas.com.tw E-Mail: [email protected] , [email protected]
4.
Wire the signal source to channel 0, and then keep set the JP1 jumper to
Single-Ended
(page 3)
, and wire the signals as follows:
Connect the
AI 0 (Pin01)
to
signal positive (+)
Connect the
A.GND (Pin17)
to
signal negative (-)
5.
Execute the UniDAQ Utility Program.
This program (UniDAQ Utility) will be placed in the default path after completing installation.
The UniDAQ Utility.exe is located in (Default path): C:\ICPDAS\UniDAQ\Driver\
Click this button
to start test.
3
Confirm the PCI-1002 series card
had successfully installed to PC. It
starts from 0.
2
Double-Click
1
