PCI-1002, PEX-1002 L/H Series Quick Start Guide
ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: [email protected] , [email protected]
Please make sure JP1 jumper and SW1 is kept in default setting before
self-test, as follows:
Jumper
JP1: Analog Input Type Selection
Single-Ended Inputs (Default)
Differential Inputs
Switch
SW1: Card ID Setting
Card ID
1
ID0
2
ID1
3
ID2
4
ID3
(*) 0
ON
ON
ON
ON
1
OFF
ON
ON
ON
2
ON
OFF
ON
ON
:
:
:
:
:
0xD
OFF
ON
OFF
OFF
0xE
ON
OFF
OFF
OFF
0xF
OFF
OFF
OFF
OFF
Step 1:
Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI/PCI Express slot.
Step 4: Carefully insert your I/O card into the PCI/PCI Express slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC
(*) Default setting
