I-7080, I-7080D, I-7080B, I7080BD User Manual (V 2.2) ------------------ 33
2.9 ~AAO(name)
Description
: Set module name.
Syntax
: ~AAO(name)[chk](cr)
~ is a delimiter character
AA=2-character HEX module address, from 00 to FF
(name)=4-character/5-character module name
[chk]=2-character checksum, if checksum disable
no [chk]
(cr)=0x0D
Response
: valid command
!AA[chk](cr)
invalid command
?AA[chk](cr)
no response
syntax error or communication
error or address error
! is a delimiter character indicating a valid command
? is a delimiter character indicating a invalid command
AA=2-character HEX module address
[chk]=2-character checksum, if checksum disable
no [chk]
(cr)=0x0D
Example
:
command: $01M(cr)
response : !017080(cr)
command: ~01O8080(cr)
response : !01(cr)
command: $01M(cr)
response : !017080D(cr)
command: ~01O8080D(cr)
response : !01(cr)
Note: This command is designed for OEM/ODM user. The user
can use it to change the module name for other purpose.
Change module name from
7080 to 8080
Change module name from
7080D to 8080D
7080/7080D
