Copyright © 2016 ICP DAS Co., Ltd. All Rights Reserved.
3
P. 3
3
Installing the Modbus Utility
The Modbus Utility can be obtained from companion CD or ICP DAS FTP
site:
CD:\Napdos\Modbus\Modbus_Utility\
ftp://ftp.icpdas.com/pub/cd/8000cd/napdos/modbus/modbus_utility/
4
Using the Modbus Utility to Assign a New IP Address
UDP Search of the Modbus Utility
can be used to configure the IP address. Before
starting the configuration process, ensure that the
LAN1
are used to connect to network
and make the controller under
the running firmware mode
. The default IP addresses
are as follows:
Item
LAN1 (default)
IP Address
192.168.255.1
Subnet Mask
255.255.0.0
Gateway
192.168.0.1
Step 1: Run the Modbus Utility, and then search the ET-8KPn-MTCP
i. Double-click the
Modbus Utility
shortcut on the desktop
ii. Select
UDP Search
from the
Client Tools
menu
iii. Click the
Search Servers
button of the
eSearch Utility
dialog, waiting for
the search to be done
ii. Select
UDP Search
iii. Click the
Search Servers
button,
waiting for the search to be done
