Главная
/
ICP DAS USA
/
ECAT-2016N
/
Быстрый запуск

ICP DAS USA ECAT-2016N, Быстрый запуск, Страница: 4 / 4

Поделиться

1
2
3
4

Страница: 4 / 4

ICP DAS USA ECAT-2016N Скачать руководство пользователя страница 4

Technical support:

[email protected]

P4



Wiring the AI0 (Analog Input type default is Differential input)



Verifying the Strain guage Functionality

Related Information

Connect the Vin- (Pin14) to
signal positive (-)

Connect the Vin+ (Pin11) to
signal positive (+)





(+)

(-)

Stable Signal Source (e.g., Dry Battery)



EtherCAT Series Product Page:

http://www.icpdas.com/root/product/solutions/industrial_communication/fieldb
us/ethercat/ethercat_selection_guide.html



Documentation & Software:

http://ftp.icpdas.com/pub/cd/fieldbus_cd/ethercat/slave/ecat-2000/

1.

Click “

AI0”

in the left-hand window.

2.

In the right-hand window, check the

voltage value in the

“Value”

item.

«
...
2
3
4

Содержание ECAT-2016N

Страница 1: ...twork flooding since the ESC will reflect any frame especially broadcast frames back into the network broadcast storm Verify that LEDs indicator The package includes the following items ECAT 2016N Module x 1 Quick Start x1 This Document 1 Connect the Host device to the IN port on ECAT 2011H module 2 Connect the PWR pin to positive terminal on a 10 30 VDC power supply and connect the GND pin to the...

Страница 2: ...nstallation folder as indicated in the table below Software Default Path Beckhoff EtherCAT Configuration C EtherCAT Configurator EtherCAT Beckhoff TwinCAT 3 X C TwinCAT 3 x Config Io EtherCAT Beckhoff TwinCAT 2 X C TwinCAT Io EtherCAT Run the EtherCAT Master software Beckhoff TwinCAT 2 X Switch on power and execute the TwinCAT System Manager Config mode 1 I O Devices Right click Scan Devices 2 Cli...

Страница 3: ...start scanning Click OK to activate the free run mode for TwinCAT system manager 5 In the left hand window ECAT 2016N is now shown in the TwinCAT system Manager Use the blade of a flat head screwdriver to push the wire clamp then hold until step 2 complete Insert the wire Use the blade of a flat head screwdriver to push the wire clamp then hold until step 2 complete Remove the wire ...

Страница 4: ...ect the Vin Pin11 to signal positive Stable Signal Source e g Dry Battery EtherCAT Series Product Page http www icpdas com root product solutions industrial_communication fieldb us ethercat ethercat_selection_guide html Documentation Software http ftp icpdas com pub cd fieldbus_cd ethercat slave ecat 2000 1 Click AI0 in the left hand window 2 In the right hand window check the voltage value in the...

Отзывы:

Нет отзывов