Firmware Update via 7188XW.exe (Ver. 1.0/Aug. 2018)
Page:
6
Step 9: Connect both the DS-700 module and your computer to the same sub network
or the same Ethernet Switch.
Step 10: Install the
VxComm Utility
on
your Host PC, and then run the Utility
to search for any DS-700 module
connected to the nework.
Step 11: Configure the correct network settings for the required DS-700 module.
Please refer to
“Chapter 3-Configuring Network Settings”
in the DS-700 Quick Start Guide. If the IP address
settings do not work correctly, please refer to
.
