ICP DAS USA DB-16R, Руководство пользователя

Страница: 12 / 61

DB -16R
2.5. Pin Assignment
The CN1 is 20-pin header linked to TTL digital I/O board via 20-pin flat cable.
The CN2 is an external power input connector for external power input wiring.
The CN3 and CN4 are relay contact screw terminal blocks.
DB-16R -CN1 : 20 Pin connector
CN2: External Power Input Connector
+5V GND GND +12V
Note : Don’t wiring to external power input connector if the power
selection jumper setting in < INT > position.
CN3 Relay contact terminal block
8
NO NC CM
10
NO NC CM
12
NO NC CM
14
NO NC CM
9 NO NC CM 11 NO NC CM 13 NO NC CM 15 NO NC CM
CN4 Relay contact terminal block
1 NO NC CM 3 NO NC CM 5 NO NC CM 7 NO NC CM
0 NO NC CM 2 NO NC CM 4 NO NC CM 6 NO NC CM
User’s Manual for DIO Daughter Boards (Ver.2.5, Jan/2004 )
11